Ran genset, now seeing 19+ volts from solar
My MH has been sitting in the driveway for several weeks with the solar panels keeping it charged. NO shore power. Today I went in to run the genset. The voltage meter read 13.6v before I did anyt...
Forum Discussion
O.K., I see that now. The neg goes down to what looks like a chip bag clip, and then to the PD converter, but then it stops there. It is the pos side of the PD converter that continues to the panel, while the neg goes to ground. So it still may be a case of the 19.6v not getting to the panel.
