So finely tackled this project. 2 weekends, 1 to reverse engineer it. Second to make the repairs.
One I now know more about this side than I ever wanted to. Two I found 2 hidden pulley system for the bottom that where in the wheel well and storage compartment that if I would have found before would have made life a little easier. I figured the top would be like the bottom…..NOPE.
If anyone need info on this system (nothing like the Accu-Slide) email me I will give you my phone number we can talk. Would be better than trying to type it all out in a post or email. A few notes. Adjustment is key with cable systems. Second Do one cable at a time. I know this sounds like common sense but with mine one loop attached to the chain drive what routed to two cable. Cut one swage reroute top the do the same to the bottom. 8 new cables used 75 ft of 1/8 cable and a million swages. And one near catastrophe. Yes I lowered the forklift to much. One inch down bye bye window up awning gone.
Oh…. Forgot one bottle of Advil……Getting old is for the birds.
Adjusted and back in
Running in and out but not adjusted yet
And the Oops...