Furnace anticipator
I had the control board on my furnace replaced, which fixed it, but before that I tried a new thermostat. The new one, like the old, had an adjustable anticipator. This is a little dial on the ins...
Forum Discussion
SoundGuy wrote:Rmack1 wrote:
Well, Doug, the problem is not temp control, but the fact that the furnace was popping on and off, less than a second, a few times before staying on. I was worried that this would screw something up.
This would seem to me to be a pretty good indication you have an issue with the furnace itself, particularly if it's worked properly up 'til now, in which case fudging the thermo anticipator would hardly be the correct solution.
It seemed to help, though. Before it was false-starting, if you will, four or five times before staying on. Now, it only does one false start before staying on sometimes.
I'm thinking of trying a higher setting yet, to see if it goes away completely.
