Honeywell RTH111B To Replace Duotherm T-Stat
I have been reading about this thermostat upgrade and have the RTH111B unit on hand to replace a Duotherm that was the original equipment in a 2008 Cedar Creek fifth wheel. I have searched and read v...
Forum Discussion
I looked at the Radio Shack switch. Looks like I would need to solder on the wire connections. Since I have no solder tool or experience with soldering, and since the low speed is of debatable value, I will wire for high speed operation only.
One response mentioned that I needed the jumper from RH to RC. My Honeywell has R and RC terminals, but no RH. So I assume that I just need to jumper from R to RC. Thanks.
One response mentioned that I needed the jumper from RH to RC. My Honeywell has R and RC terminals, but no RH. So I assume that I just need to jumper from R to RC. Thanks.
