new power max converter, problems
Replaced wfco 8955 converter with power max pm4b-55-mba converter. I put the new PM in today and followed the testing directions. Step 1. With only shore power hooked up and all DC fuses pulled ...
Forum Discussion
This mourning the voltage at output side of converter is 13.17 and at batteries voltage is 13.16.
I am assuming that when I start putting a load on batteries and battery charge goes down then I will still see the voltage drops (as I did last night) when converter is trying to charge.
The wire size from converter output to batteries are 6 gauge
I will check connections, wiring and etc for voltage drop.
I am assuming that when I start putting a load on batteries and battery charge goes down then I will still see the voltage drops (as I did last night) when converter is trying to charge.
The wire size from converter output to batteries are 6 gauge
I will check connections, wiring and etc for voltage drop.
