Refrigerator won't acknowledge AC
I thought I had an issue at one point with my electric element in my fridge so I took it out to test it. I had a neighbor test it with a meter and he said it seemed fine so I hooked up a plug-in end t...
Forum Discussion
Much of the board is 12 volts DC. The 120 sensor may activate a 12 volt DC circuit to energize the relay.
You may pull the circuit board out and look on the back side for any burnt locations.
Just guessing though!
You may pull the circuit board out and look on the back side for any burnt locations.
Just guessing though!
