Remote Rectifier For The Largest Alternators
Bolt One Of These http://www.ebay.com/itm/Bridge-Rectifier-3ph-300A-1600V-MDS300A-diode-3-phase-300-amp-1600-volt-1-PC-USA-/281298783935?pt=LH_DefaultDomain_0&hash=item417eb6cebf Onto one of t...
Forum Discussion
Nooooooooooooooooooo
Those are alternating current caps. Look for a
ELECTROLYTIC RADIAL CAPACITOR.
When you are winding or twisting the three stator feed wires I would incorporate a single 18-gauge wire twisted in with the three wires. Ground ONLY one end of the 18-gauge wire. To the battery negative of the house bank.
If the alternator generates electronic noise, connect
01 uf mica caps across the stator wire input at the remote rectifier.
1-2, 1-3, & 2-3
Those are alternating current caps. Look for a
ELECTROLYTIC RADIAL CAPACITOR.
When you are winding or twisting the three stator feed wires I would incorporate a single 18-gauge wire twisted in with the three wires. Ground ONLY one end of the 18-gauge wire. To the battery negative of the house bank.
If the alternator generates electronic noise, connect
01 uf mica caps across the stator wire input at the remote rectifier.
1-2, 1-3, & 2-3
