removal of radio

Question

I have one of those basic stock radio CD players and I want to remove it to gain access to the area behind it as well as pursue connecting other speakers into the system. Can someone tell me how to remove it? I see no screws and it does not appear to have a normal faceplate. Any hints would be welcomed.

Greg

rvten · Answer

If you have the packet that came with your RV.In it there might be info on the radio.Some radios had a set of wire looking gagets. That you inserted into the locking pins. To release the radion.

therink · Answer

On my last two trailers the radios have a flat plastic covers (vertically)  on each side.  Pop the covers off and remove 4 screws.  Pulls right out. I have also seen where the plastic outer frame pops off and screws are under there.

nmhuntr · Answer

therink wrote:On my last two trailers the radios have a flat plastic covers (vertically)  on each side.  Pop the covers off and remove 4 screws.  Pulls right out. I have also seen where the plastic outer frame pops off and screws are under there.That sounds like it might be it. I will give it a try this weekend.Thanks

samsontdog · Answer

therink wrote:On my last two trailers the radios have a flat plastic covers (vertically)  on each side.  Pop the covers off and remove 4 screws.  Pulls right out. I have also seen where the plastic outer frame pops off and screws are under there. That's the way mine is also

Forum Discussion

removal of radio

4 Replies

About Technical Issues

Related Content

Staple Removal

Easy way to remove slide topper?

Radio Removal

Tailgate Removal

CBC radio