Repair of trailer bottom
This may be in wrong section but since I want to do this myself I posted it here. I had a blow-out on my TT and above where the tire is the insulation is shredded. There seems to be a hole there (do...
Forum Discussion
Well, I further investigated the extent of the damage and found that there was no damage to the wheel well but there was to the bottom area past the wheel well. I attached a piece of 3/8" plywood to the bottom. It is directly under the slide-out and was concerned about whether it was damaged but found none so I feel that I am in good shape. I coated the plywood with a water sealer and hopefully that will do the trick.
