Replace old TV antenna
Hi - Our 1996 camper has the typical old batwing type antenna that raises up with a crank from the inside. I recently hooked up a new digital tv to it and could only get about 1 channel. I thought I...
Forum Discussion
darsben1 wrote:
They both receive Digital signals just fine if I remember to turn on the amplifier.
The Winegard wall plate illustrated above is NOT an amplifier, is not a booster as so many seem to claim, has no ability to amplify the signal coming from the antenna head. :R Pushing the front panel switch merely routes 12 vdc to the head where the amplifier in a Sensar III / Sensar IV is located. When this switch is turned off it disconnects this power from the head and routes the cable feed to the unit instead of the antenna feed. If you want a wall plate that actually does amplify the antenna head feed then you want a Winegard SensarPro which offers +/- 10 db signal gain / attenuation.
