mchero wrote:
I'm looking at dropping thru left rear thru closet or better yet down thru rear cap, over to electrical bay. 
Is the fridge vent too far? 
1,000W in parallel is ~33A @30V. 
MC4 #8   at 10ft length from the panel MC4 Y-splitter to the J-box in closet would result in less than 0.4% voltage drop. In MPPT this is equals to 0.4% wattage drop. This is at the peak currents.  Most of the day the current will be lower, so the V-drop (or W-drop) caused by AWG 8 will be negligible. No J-box on the roof, no big holes. 
Then you run a welding cable as beefy as you like, for the rest of the route to controller.