Sea Foam. Now I'm a believer
Hope this is an acceptable topic for Tech issues. I have read on these forums for years about the praise others have bestowed on Sea Foam gasoline additive. I never tried it until recently in my Ho...
Forum Discussion
profdant139 wrote:
So for a very balky chain saw, would you recommend running straight Sea Foam just to clean it out, and then switching back to gas dosed with Sea Foam?
First off please bear in mind your saw is a 2 stroke, it needs the proper gas / oil blend.
Having said that, I have in the past in a similar situation drained the tank, partially refilled the tank with straight SeaFoam and using the primer pumped the carb to overfilled and then just left it to sit for a day. Later I filled the tank with proper gas / oil blend and ran that through.
It worked very well.
