Setting up my solar system
I'm in the planning stages of adding solar to my travel trailer. I currently have a battery bank of two 6V flooded lead acid GC batteries in series that is 215 Ah 12 volts. I am planning on adding ...
Forum Discussion
I got the rest of the wiring done and the MT50 remote sensor mounted and wired.
So far so good. I towed my trailer to work so I can keep an eye on how it is producing, as I didn't want to leave it on and unattended after getting it first set up. At 7 am this morning, and it's a very cloudy dark morning, the panels were putting out 2 amps at 35ish volts.
I also need to weld up some battery mounts and get the other two GC2 batteries mounted in series-parallel. I should be able to get to this over the weekend, but I wanted to test out the solar setup first.
So far so good. I towed my trailer to work so I can keep an eye on how it is producing, as I didn't want to leave it on and unattended after getting it first set up. At 7 am this morning, and it's a very cloudy dark morning, the panels were putting out 2 amps at 35ish volts.
I also need to weld up some battery mounts and get the other two GC2 batteries mounted in series-parallel. I should be able to get to this over the weekend, but I wanted to test out the solar setup first.
