We have a dining table in our latest camper is the style where the two leg tubes fit into holes/mounts on the floor and the table, and it is INCREDIBLY wobbly when set up. I looked into finding replacements, but all I could find was the same mounts/legs which I think would be just as wobbly. Does anyone know if there is a way to stabilize tables with these mounts/legs:https://cdn11.bigcommerce.com/s-kwuh809851/images/stencil/590x590/products/579/3650/_Tabletop_3-4_2_Legs___99159.1534783095.jpg?c=2

Try some tape for a shim and if resolved look for a more permanent shim.

Is it wobbly because it fits the floor sockets loosely? Ours got wobbly because the floor socket cracked, fixed it by replacing the floor socket. Maybe the socket on the table isn't mounted solidly. Describing where it's wobbly would help. Do the legs not fit solidly into the sockets?

When secured CORRECTLY, this type table does not wobble. Odds are the floor mounts have stripped out their screws. Fix is to remove both floor mounts and rotate about 1 inch to get the mount screws to hit fresh wood. DougIt is VERY common for this type table system to come loose. When in table mode, pushing and pulling by the diners cause the mounts to strip out in the wood floor.

I had a similar issue. The ends of the tubes are crimped inwards so that there is initially a good fit. Eventually wear caused a loose fit and I had to replace the tubes. You might want to start over with an entirely new table mount system. I went with the Lagun and really like it. Check out the videos.

JimK-NY wrote:I had a similar issue. The ends of the tubes are crimped inwards so that there is initially a good fit. Eventually wear caused a loose fit and I had to replace the tubes. You might want to start over with an entirely new table mount system. I went with the Lagun and really like it. Check out the videos.Im having the same issue but the Lagun won't work for me. I may try just buy another base leg and see if that is the issue, thanks.

SEVERLY wobbly dining table | Good Sam Community

CA_Traveler
Explorer III
Jul 04, 2023
Try some tape for a shim and if resolved look for a more permanent shim.
fj12ryder
Explorer III
Jul 04, 2023
Is it wobbly because it fits the floor sockets loosely? Ours got wobbly because the floor socket cracked, fixed it by replacing the floor socket. Maybe the socket on the table isn't mounted solidly. Describing where it's wobbly would help. Do the legs not fit solidly into the sockets?
dougrainer
Nomad
Jul 04, 2023
When secured CORRECTLY, this type table does not wobble. Odds are the floor mounts have stripped out their screws. Fix is to remove both floor mounts and rotate about 1 inch to get the mount screws to hit fresh wood. Doug

It is VERY common for this type table system to come loose. When in table mode, pushing and pulling by the diners cause the mounts to strip out in the wood floor.
JimK-NY
Explorer II
Jul 04, 2023
I had a similar issue. The ends of the tubes are crimped inwards so that there is initially a good fit. Eventually wear caused a loose fit and I had to replace the tubes.

You might want to start over with an entirely new table mount system. I went with the Lagun and really like it. Check out the videos.
StirCrazy
Moderator
Jul 05, 2023
JimK-NY wrote:
I had a similar issue. The ends of the tubes are crimped inwards so that there is initially a good fit. Eventually wear caused a loose fit and I had to replace the tubes.

You might want to start over with an entirely new table mount system. I went with the Lagun and really like it. Check out the videos.

Im having the same issue but the Lagun won't work for me. I may try just buy another base leg and see if that is the issue, thanks.
TheLostBoy
Explorer
Jul 06, 2023
CA Traveler wrote:
Try some tape for a shim and if resolved look for a more permanent shim.

Yeah, I think I might try this first. Maybe some duct tape wrapped around the legs? I'll try it and report back.
TheLostBoy
Explorer
Jul 06, 2023
fj12ryder wrote:
Is it wobbly because it fits the floor sockets loosely? Ours got wobbly because the floor socket cracked, fixed it by replacing the floor socket. Maybe the socket on the table isn't mounted solidly. Describing where it's wobbly would help. Do the legs not fit solidly into the sockets?

The floor is solid and the sockets are solid, but the legs seem to move too much in the sockets. They seem to fit nicely when put in place, but then when you lean on the table, it moves....a lot.
TheLostBoy
Explorer
Jul 06, 2023
dougrainer wrote:
When secured CORRECTLY, this type table does not wobble. Odds are the floor mounts have stripped out their screws. Fix is to remove both floor mounts and rotate about 1 inch to get the mount screws to hit fresh wood. Doug

It is VERY common for this type table system to come loose. When in table mode, pushing and pulling by the diners cause the mounts to strip out in the wood floor.

They are secured correctly. The bases are absolutely solid and so is the ground/table. The legs seem to have a bit of room in the sockets.
TheLostBoy
Explorer
Jul 06, 2023
dougrainer wrote:
When secured CORRECTLY, this type table does not wobble. Odds are the floor mounts have stripped out their screws. Fix is to remove both floor mounts and rotate about 1 inch to get the mount screws to hit fresh wood. Doug

It is VERY common for this type table system to come loose. When in table mode, pushing and pulling by the diners cause the mounts to strip out in the wood floor.

They are secured correctly. The bases are absolutely solid and so is the ground/table. The legs seem to have a bit of room in the sockets.
TheLostBoy
Explorer
Jul 06, 2023
JimK-NY wrote:
I had a similar issue. The ends of the tubes are crimped inwards so that there is initially a good fit. Eventually wear caused a loose fit and I had to replace the tubes.

You might want to start over with an entirely new table mount system. I went with the Lagun and really like it. Check out the videos.

Yeah, that's what I'm thinking and I was shopping around, but I'm just worried that I'll replace them and be in the same boat. These pressure-fit type tables are never quite perfectly solid (in every camper I've been in, they've had a bit of a rock to them, but not as bad as I'm seeing now).

It looks like they've invented some telescopic legs for campers, but they're quite expensive, but maybe even one would work for me, even though it is a larger table?

Forum Discussion

SEVERLY wobbly dining table

About Technical Issues

Related Content

Dining Table wobble solution

Steering wobble.

Wobble Stoppers?

Death wobble

Death Wobble Continues ....