Siding replacement

Ralph Cramden wrote:

dougrainer wrote:

Ralph Cramden wrote:

dougrainer wrote:
"The RV manufacturers get the stuff dirt cheap. A lot actually roll their own."

You know this HOW? I have NEVER seen any RV maker that had their own aluminum plant to "roll" their own Metal siding.

I know it because I watched them do it. The machinery needed to roll that siding is a drop in the bucket when compared to the jigs, tables, and presses they have in a dedicated plant for making laminated walls and floors, but I suppose they don't have those either. The space needed to set up a line to roll RV siding amounts to about a 2 car garage. It's not much different than the seamless gutter guy who rolls gutters out the rear of a box van.

WHAT OEM? I have worked in the RV business 44 years. I UNLOADED pallets of Metal for Coachmen when I was in High school and ALL the Metal we have replaced in the 38 years as a Tech the OEM's NEVER had the metal. They had to have THEIR supplier to make the required metal OR until a few years ago there were regional Metal fabricators that would build the RV metal to the OEM specs. Now, if you are comparing Laminated, we are talking S lock metal siding that is manually hung. You are comparing Apples and Oranges. Doug

I don't care to be questioned, nor do I have a desire to prove anything to you. Whatever you say. Based on your 44 years of empirical knowledge.......I digress.