I have the Lippert components Schwintek in-wall slide. Slides are a new area for me, so I've been reading and studying up on maintenance & troubleshooting guides.
Oddly, most are focused on troubleshooting, but little if anything on maintenance.
For the in-wall slide, they have an adjustment method by running it all the way out, and hold the switch until just after both motors stop. Then run it in 1-2 inches, and back out again - same deal - hold the switch a second or so after both motors stop.
I haven't studied the manuals on the Lippert Above Floor models, however, as well as it it covered in the In-Wall type, perhaps they have a similar adjustment for the Above Floor unit. The
Lippert Components Inc website has several manuals.
Let us know what you find.
