solar array charging ?
A solar newbie, I have 3 100w renolgy eclipse panels and a renolgy 40amp commander controller. A 255ah lifeline battery. I do have a breaker between my pv panels and the commander. Am wondering ...
Forum Discussion
time2roll wrote:
Would be helpful to have an actual voltmeter instead of just a few flashing green lights.
The manual I linked above says the controller ships with the optional MT50 which has the display, etc.
Does the OP have the MT50, and is the cable long enough to allow it to be mounted where it can be seen inside the RV, while the controller is somewhere unseen closer to the battery bank?
My Tracer has a proper display, but it also could work with the MT50 if I had one. Don't need one for it in the current set-up though.
