Almot wrote:
Looks like Absorb voltage is fixed (and so is Float), but Absorb timer is adjustable from 2 to 4 hours, and Absorb stage will end regardless of the timer if current drops to 0.75/1A. And then it says "if current <0.2A the stage will end". Confusing but this doesn't give a reason to blame the controller.
I think before replacing the controller with another one, you should check SG and try to equalize batteries after fully charging it. Preferably at home when you're not using them, or - better yet - if you have 12V supply. I would agree with BLF that they are in a bad shape.
Unless the setting was somehow reset to 4 hours from 2 hours. What is the default?