Solar cable routing behind front cap
I'm looking to finally begin my solar install and I'm trying to plan the best route for my solar cables. Batts are on the tongue, front pass through area houses the inverter and is where I will mo...
Forum Discussion
Not familiar with your rig, but the norm is to bring rooftop wiring down to charge controller via fridge vent or even grey vent. Then wires go from charge controller forward to the batts. Im not sure I would want to drill into the top then bottom of the cap. Having shorter wire runs is tempting, but using properly sized wires will minimize loss and allow less invasive hole cutting. Hopefully other TT owners will give some advice as my solar was done on a 5er
