Solar cable routing behind front cap
I'm looking to finally begin my solar install and I'm trying to plan the best route for my solar cables. Batts are on the tongue, front pass through area houses the inverter and is where I will mo...
Forum Discussion
epfd217 wrote:If you have some fish sticks or a fish wire, run it up from the bottom and measure length to the top of the cap. Total fish length should be within 1 1/2" of the cap height, if open all the way, inside.
The front cap area is already accessible from below. Thats how I know its hollow from the bottom.
My rig has a residential fridge (no I don't plan to run using solar), so there is no fridge vent. I could use a vent path to the underside of camper, but I'm hoping so see if anyone knows if the front caps remain hollow to the top.
I would still have to drill a hole and use a combiner box or glandat the front lip of the rig, but it would provide an unobstructed route to the front pass-through if my presumption is correct. Also, the entire front of my rig is wide open and perfect for panels.
