Solar cable routing behind front cap
I'm looking to finally begin my solar install and I'm trying to plan the best route for my solar cables. Batts are on the tongue, front pass through area houses the inverter and is where I will mo...
Forum Discussion
My son was easily able to run down the front cap of his Wind River. F/glass sticks did the job from the inside connections in the front cabinet.
You could use this for the input on the top of cap, if fits:
https://www.zampsolar.com/solar-ports
Or just for one pair of wires:
https://www.amazon.com/Winegard-CE2000-Cable-Entry-Plate/dp/B009LX1HFO/ref=pd_sim_263_4?_encoding=UTF8&pd_rd_i=B009LX1HFO&pd_rd_r=EA61G4F5RCPCG48VZK98&pd_rd_w=EKdQu&pd_rd_wg=dYIDp&psc=1&refRID=EA61G4F5RCPCG48VZK98
I used the second one, with liberal Dicor and have no leaks!!!
You could use this for the input on the top of cap, if fits:
https://www.zampsolar.com/solar-ports
Or just for one pair of wires:
https://www.amazon.com/Winegard-CE2000-Cable-Entry-Plate/dp/B009LX1HFO/ref=pd_sim_263_4?_encoding=UTF8&pd_rd_i=B009LX1HFO&pd_rd_r=EA61G4F5RCPCG48VZK98&pd_rd_w=EKdQu&pd_rd_wg=dYIDp&psc=1&refRID=EA61G4F5RCPCG48VZK98
I used the second one, with liberal Dicor and have no leaks!!!
