Solar install so far
When I replaced the vent fan in the bathroom I saw the skimpy roof build first hand. I couldn’t see how drilling into a thin layer of fiberglass and luan then into styrofoam would be a good mount for ...
Forum Discussion
I finished bolting the panel racks today.
I could tell I hit something solid behind the trim. I used double sided Eternabond behind the holes to waterproof. The photo shows the adjustable furniture legs I’m using to make the racks sturdier.
I plan to bolt the legs onto the racks.
I ended up just cutting the refrigerator vent panel off at the rear. What is left still covers the vent fully.
I also further configured the Cerbo GX to read data through the mifi. When I did it earlier I didn’t reboot and the change was lost.
This was the morning after running the equipment and the fantastic fan overnight.
The AC info will never populate unless I replaced my generator and charger with Victron products.
Today was the best solar generation although if was a bit cloudy.
The graph from the Cerbo can tell when I plugged in the RV and ran the charger even though I don’t get that info on the display.
It’s a cool tool but has limited usefulness for the cost.
I could tell I hit something solid behind the trim. I used double sided Eternabond behind the holes to waterproof. The photo shows the adjustable furniture legs I’m using to make the racks sturdier.
I plan to bolt the legs onto the racks.
I ended up just cutting the refrigerator vent panel off at the rear. What is left still covers the vent fully.
I also further configured the Cerbo GX to read data through the mifi. When I did it earlier I didn’t reboot and the change was lost.
This was the morning after running the equipment and the fantastic fan overnight.
The AC info will never populate unless I replaced my generator and charger with Victron products.
Today was the best solar generation although if was a bit cloudy.
The graph from the Cerbo can tell when I plugged in the RV and ran the charger even though I don’t get that info on the display.
It’s a cool tool but has limited usefulness for the cost.
