Solar question
I just had a Renogy 400 watt solar premium eclipse Kit installed on our 2004 Montana 5th wheel. I had to have it installed because I recently had back surgery. I also had a Renogy 2000 watt inverter/c...
Forum Discussion
So I just talked to the installer, he said he installed a new breaker in my main panel for the inverter. And yes he said I have to have inverter in auto mode when hooked up to shore power. And if the inverter breaks while I'm out in the woods. Well he said it might allow the genorater to power the coach but if it doesn't He said I would have to kill all AC110v turn off battery bank turn off the new breaker and take the 6 AC wires in the back of the inverter (3 in from trailer and 3 out to breaker panel in coach) and wire them together and I will be back to gen. power bypassing the inverter.
So I'm thinking of wiring in a bypass for these 6 wires. could I leave the 6 wires connected to inverter install a 3 wire loop with a breaker in the off postion. Then if inverter did break and would not allow current to run thru it, then I should be able to turn inverter off flip on breaker in the new loop and that should allow 110ac to pass into the coach? Correct or am I missing something?
So I'm thinking of wiring in a bypass for these 6 wires. could I leave the 6 wires connected to inverter install a 3 wire loop with a breaker in the off postion. Then if inverter did break and would not allow current to run thru it, then I should be able to turn inverter off flip on breaker in the new loop and that should allow 110ac to pass into the coach? Correct or am I missing something?
