Sticking slide out
My bedroom slide out needs mechanical help to get started moving in or out, but once moving, it works fine. The motor was replaced about a year ago. Any suggestions?
Forum Discussion
subcamper wrote:Monaco?
The slide rides up a piece of low-friction plastic that is across the whole width of the slide. This is the feature that is advertised as the "flush floor" of the slide.
My flush floor slide skid broke and jammed the slide. If it had not jammed the slide would be about 1/8" lower and/or would have not worked very well.
If you see any cracking of the skid then replace it. If handy it can be a DYI project. I now have stainless skids.
