Stripped Threads
My TT is typical laminated wall construction and many places where items are fastened with screws are stripped out. Since the screw threads only have the thin laminate and foam to grip that is no surp...
Forum Discussion
Dennis M M wrote:4aSong wrote:We Cant Wait wrote:
Toothpick's coated with Super Glue GEL, shoved into the hole, use enough so last one is sort of forced in. Allow to dry and then drill a SMALL pilot hole for the screw to go into.
X2
X3 - but I usually use Elmer's. BTW, who has matchsticks anymore?
I do :B
Use them all the time to fill stripped holes in cabinets, door hinges etc.
Toothpicks in small holes and wooden dowels in large holes.
Coated with glue of your choice. Let dry. Re-install screw.
Pilot hole in dowels.
And use a hand screw driver......not a power one or you'll be redoing it again.
