Suburban Water Heater
Cannot get my Suburban water heater to light. Turned it on yesterday and it out OK. Realized after a while that I forgot to turn off hot water bypass!! Fixed that and hit reset button on heater(outsi...
Forum Discussion
IT being a dual heat WH (electric & propane) it has 2 separate set of t-stats.
Both are under the cover above gas valve in outside compartment.
Both have a high temp t-stat that when it trips can be reset.
On that cover are two buttons to reset high temp t-stat-----push to reset
Left side is for electric and right side is for propane
The high temp t-stat will trip if temp exceeds 170*F (normal should have opened at 130*F). If high trip has tripped and needs to be reset normal t-stat failed.
The electric uses a 120V AC set of t-stats
The propane uses a 12V DC set of t-stats.
Both are under the cover above gas valve in outside compartment.
Both have a high temp t-stat that when it trips can be reset.
On that cover are two buttons to reset high temp t-stat-----push to reset
Left side is for electric and right side is for propane
The high temp t-stat will trip if temp exceeds 170*F (normal should have opened at 130*F). If high trip has tripped and needs to be reset normal t-stat failed.
The electric uses a 120V AC set of t-stats
The propane uses a 12V DC set of t-stats.
