SoundGuy wrote:
That so-called "booster" or wall plate you're referring to, the Winegard RV-7042 being the most common example, is not a booster as it has no ability whatsoever to amplify the antenna signal. :R All it does is route either the cable feed to the television when switched OFF or route the antenna feed to the television when switched ON, and in this ON position it's also supplying 12 vdc to the antenna head where the actual signal boosting circuitry is located....
If you had a ceiling fan with an ON-OFF would you lable the switch as, "ON-OFF" or would you label it "FAN"?
A switch that provides power to a physically connected booster amp would logically be labeled "Booster" or "Antenna Feed".
Seems a nit that shouldn't be.