Surge protector install
Hello everyone! New to forum and rving. Just got a portable surge protector that plugs in outside at the power box. Any reason I can't install it inside if I cut the power cord and put male/female ...
Forum Discussion
Lantley wrote:
Maybe I should get a hardwired model and put male and female ends on it and plug it into the pedestal :S
Technically one could BUT the hard wire models use a separate plug in monitor, connected to the EMS with a 16' length of cable, so you'd have to make sure that monitor is always plugged into the EMS before powering it up. Cumbersome, to say the least. :S
Lantley wrote:
If you are going to cut wires anyway why not get a hardwired model:h
If you buy a hard wire model and wire it in as recommended you can't later remove it without opening it up and removing that wiring. I side stepped this issue myself by adding matching sets of 30 amp connectors to my own EMS-HW30C so I can remove it from the trailer in seconds. :B
