Testing electric brakes, Update.
I want to test out the electrical side of our fivers brakes. I read an article giving the max amp draw for four 10 or 12 inch brakes as 11.3 - 13.3. I can use a 20 amp multi tester. My thinking is to...
Forum Discussion
Snowman9000 wrote:
Ok, I’ve got 12.3v output to brakes with the lever pulled, and 10.5a. So it’s a little low, but is it significant?
Now need to see if the amps are getting to the magnets. DC clamp meter is the easy/fast way to verify at wheels without cutting wires.
