Thermal Mounting Paste Specifications
This technology came along after my horsee and I rode into the sunset. Therefore I have zero experience in comparisons. This is for mounting a solid state DC/DC 100-amp rated relay which is not that much larger physically than 25-amp relay. The relay is on the charge line to parallel a pair of Lifelines through a current limited pair of circuits.
This stuff is a LOT more expensive than regular zinc-oxide silicone grease. Frankly I am lost, and would appreciate some advice :)
____________________________________________________________________
Color Silver
Thermal Conductivity
>2W/m-k
Thermal Impedance <0.36?-in2/W
Specific Gravity
>1.6
Evaporation <0.005%
Bleed <0.05%
Dielectric Constant A >5.0
Operation Temperature -50~240?
Silicone Compounds 50%
Carbon Compounds 10%
Metal Oxide Compounds 40%
This stuff is a LOT more expensive than regular zinc-oxide silicone grease. Frankly I am lost, and would appreciate some advice :)
____________________________________________________________________
Color Silver
Thermal Conductivity
>2W/m-k
Thermal Impedance <0.36?-in2/W
Specific Gravity
>1.6
Evaporation <0.005%
Bleed <0.05%
Dielectric Constant A >5.0
Operation Temperature -50~240?
Silicone Compounds 50%
Carbon Compounds 10%
Metal Oxide Compounds 40%
