Thermo-Panel Separation
Looking for any opinions or advice on old Winnebago first gen Thermo-Panel separation of adhesive. Large flat wall area has developed a bubble. My usual tech guy said the fiberglass panel's adhesive...
Forum Discussion
I had something similar and after talking with West Marine (boats have plenty of delam issues) decided to go with a medium cure epoxy (forgot which one) and held the side in with a DIY setup. I drilled a couple of holes and used a large syringe to inject. The epoxy was sanded flush with exterior and I used a dab of touch up paint to cover the holes. At any rate - consider talking with boat shop about your problem - they may have more specific suggestions. Hope this helps.
