Thetford Aqua Magic IV Blade Position Needed
Today I pulled out and took apart my Thetford Aqua Magic IV Toilet. I did this with the intent of replacing the blade and seal. However, as soon as I had it apart the blade had fallen off the actuator...
Forum Discussion
Forgot to say the new spring was different than the old one, just wouldn't work. Tried the old spring but would not hold water. Went to a combo of old spring and slipped newer smaller spring inside. Had to give it a couple of haircuts to get it in(much too much spring life, also heavier gauge than old spring.) So it is in and flapper moves back then sticks. Must be closed by pulling peddle up with foot.I hope it wears in but I am ready for a new toilet. Forgot how fussy these can be.
