Tiny Soldering "gun"?
I am working on micro-size parts that challenge perspective perspectives when trying to describe to others. Imagine an EIGHT conductor plug that can fit perhaps 15 (or 20) pieces atop a postage stamp....
Forum Discussion
Excellent for when a controlled amount of solder is needed. Closeout item-when they are gone no more will be made. Pellets are approx .500 x .100 x .030 thick. Melting point is 300 degrees. This alloy contains 50% tin, 32% lead & 18% cadmium. For all your manufacturing needs please visit alcanjewelrysupply.com. Contact us for possible volume discounts..
https://www.ebay.com/itm/Solder-pellets-low-melt-approx-500-x-100-x-030-1-lb-bags/223372160340?hash=item340204ad54:g:FtUAAOSwualcWyS7
DANGER! Poisonous to breathe smoke! A paper medical mask MUST BE WORN WHILE SOLDERING because of the CADMIUM CONTENT!!!
That being said this stuff is near miraculous when soldering near plastic. 300F is what, almost 50F lower than 63/37 electronics solder.
Melt a pellet onto the tip then transfer to the work.
https://www.ebay.com/itm/Solder-pellets-low-melt-approx-500-x-100-x-030-1-lb-bags/223372160340?hash=item340204ad54:g:FtUAAOSwualcWyS7
DANGER! Poisonous to breathe smoke! A paper medical mask MUST BE WORN WHILE SOLDERING because of the CADMIUM CONTENT!!!
That being said this stuff is near miraculous when soldering near plastic. 300F is what, almost 50F lower than 63/37 electronics solder.
Melt a pellet onto the tip then transfer to the work.
