Tristar 45 PWM Custom Profile
First..... I have a few images in this to help illustrate. Views best if you are allowing images! I tried to repeat in text what the image was saying, but a picture, as we know, is worth more. ...
Forum Discussion
I would skip the automatic equalization as the voltage is a bit high for some RV components.
Keep this as a manual process.
I believe float cancel is the morning voltage. If the battery gets very low overnight this will trigger the controller to extend absorption for the full day. I would keep this pretty low such as 11.5 to 11.9 volts. Mine is set at 11.9 volts.
Low battery trip I believe is to restart bulk charge if battery voltage drops for some time during the day due to high loads. If you run the Microwave off inverter for 2 minutes this might trigger bulk stage. I would set the voltage a bit lower like 12.2 on this setting and give about 15 minutes for time.
Keep this as a manual process.
I believe float cancel is the morning voltage. If the battery gets very low overnight this will trigger the controller to extend absorption for the full day. I would keep this pretty low such as 11.5 to 11.9 volts. Mine is set at 11.9 volts.
Low battery trip I believe is to restart bulk charge if battery voltage drops for some time during the day due to high loads. If you run the Microwave off inverter for 2 minutes this might trigger bulk stage. I would set the voltage a bit lower like 12.2 on this setting and give about 15 minutes for time.
