troubleshooting a propane range oven pilot
So...this isn't really an RV specific question, as I've turned my TT into essentially a permanent tiny home, but I figured this was a good a place as any for a general knowledge base on propane applia...
Forum Discussion
Bessie-Hunter wrote:
The screw your turning converts the pilot setting from Nat gas to LP. Leave it on LP. Disassemble the pilot assembly and clean the orifice and the entire pilot assembly. The screw on the pilot line on the back side of the valve is the adjustment for the high pilot adjustment.
Totally agree^^^^^^^^^^
One other point
That 'spreader plate assembly' for pilot flame...it appears to be pointing pilot flame onto 'barrel' of thermocouple not the tip and in that position is short of the pilot flame ignition slot for main burner flame
Has it been moved...can it be moved???
