Truck Camper Sub-floor Issue and Repair
We have a 2006 Okanagan 811SL truck camper with a slide out. About a year ago, it developed a depression in the floor, right where you climb up into the over-cab bunk. I was afraid that it was rotti...
Forum Discussion
3/4 x3/4 x 1/8 angle iron. Notch the ends so it is supported on the framing with the flange supporting that questionable joining practice. Drill and countersink the vertical flange (lower than centerline) for suitable flat head screws to drive in parallel to the floor sheet. Before final assembly, dampen the wood with a sprayer bottle of water and get some urethane glue in the split. Practice dry fit up first as the final fit will be much easier.
Art.
Art.
