Useful Solar Data
Next week I'll be dry camping in Q for 3 days and this will be my first "real" solar experience. I've got 3x250W panels and a MPPT60 controller. As a learning experience what data would be useful t...
Forum Discussion
KJINTF wrote:Thanks appreciate the offer. For now all I did was set the dip switches. See my post above on my concern about the values I'm seeing with the Read TSMPPT command.
Bob
Happy to talk you through your configuration questions...
If all you did was to set the dip switches and call it good - it did NOT get you where you need to be. The dip switches affect only a very few of the total settings. The configuration settings not affected by the switches will be at factory default values. Use that new Tripp lite USB<>Serial device or the Ethernet interface it's actually a very simple process. Take full advantage of that wonderful controller. Remember you will need to re-boot after downloading a config file.
