Voltage drop on inverter
I have a Samlex 3012 inverter charger that is powered by 4 x 100 ah LIFEPo4 batteries. Each of the batteries is wired separately to a bus bar using 00 welding cable, this bus bar feeds another one tha...
Forum Discussion
MEXICOWANDERER wrote:
One positive
One negative
Excellent practice
This is why I despise unsoldered lugs Don't give a **** if they're squeezed till they fart, this would never happen with soldered lugs.
Oh they look good
Tighter than hell
But it doesn't work
There is ZERO protection between the interior of the lug surface and the stranded wires.
I disagree and prefer crimping, these people explain why:
https://www.evdrives.com/category_s/4013.htm
In the marine world crimping is preferred due to oxidation and soldering can prevent flex at the lug joint as well leading to fatigue.
