WF 8955 converter 12 volt fue panel problem
The problem is not the converter. The problem is in the 12volt fuse panel. I have voltage on the side that shouldn't have any when the fuse is removed. about 10 volts It does it on all fuse slots ...
Forum Discussion
Try a 5 watt 120 ohm pullup resistor between the malfunctioning pilot lamp and chassis negative. Yes this is utter overkill for the job. Dirt cheap and it works. I just arrived at the medpad and I am pooped. Too much hours in the avion-compactor. The VOLARIS waiting area in Tijuana was one hundred five degrees.
