WF 8955 converter 12 volt fue panel problem
The problem is not the converter. The problem is in the 12volt fuse panel. I have voltage on the side that shouldn't have any when the fuse is removed. about 10 volts It does it on all fuse slots ...
Forum Discussion
The red light is a diode (LED) and will block a bit of voltage and will pass a bit of current to indicate a bad fuse when the circuit tries to draw some current.
Check the fuse with your meter and re-install a good fuse. This should give full voltage and no light.
Check the fuse with your meter and re-install a good fuse. This should give full voltage and no light.
