WF 8955 converter 12 volt fue panel problem
The problem is not the converter. The problem is in the 12volt fuse panel. I have voltage on the side that shouldn't have any when the fuse is removed. about 10 volts It does it on all fuse slots ...
Forum Discussion
5 MILLI amps of bleed can cause a 5-volt potential exist in a switched buss, try it with reality instead of a calculator and sharp pencil. 3mm LEDs are incredibly prone to lighting up at voltages that are outrageously low. Having built so many indicator panels with LED and piezo annunciators taught me a lesson in reality.
Good meters have high impedance. But when a dime store meter cancels a ganged bleed of (one LED) it will have you scratching your head -- have fun :)
Good meters have high impedance. But when a dime store meter cancels a ganged bleed of (one LED) it will have you scratching your head -- have fun :)
