The wfco is good and goes into float mode and all that but never in bulk is the downfall.. I will call the vender to see what they say before I upgrade..
I have #6 wire running less then 15 ft from converter to batts..
So the hydrometer testing reads fair 1215 on the hydrometer after being 24 hours plugged in..
Thats what? 60-70% charged? Sheesh!!! Imaging running a genertator...
wfco still reads 13.6. So I put out my 280 watt panel and plugged a load into my inverter to drop the voltage to 12.9 so the mppt would kick into bulk mode.
So I am in bulk mode charging @ 14.7 volts @ 15 amps or so..
Wfoco has been on 24 hours almost and batts not nearly even charged 100%.
I read the charts and I guess I can say if my hyrometer gets near 1200 im 50%
