WFCO WF-8955 amps in absorption mode
I have a WFCO-8955 (55 amp) that absolutely will not go into bulk mode even though it’s a 3 stage converter. Not sure if it’s inadequate wiring or an inadequate converter. It’s always 13.6-13.8 no mat...
Forum Discussion
Interesting, our new Wolf Pup has an 8955. So far, I've only seen it stay at 13.6 volts. Haven't left it on long enough to see if it drops to 13.2, but it never goes to 14.4. Strange thing is the manual cryptically says "although the converter is outputting 14.4 VDC, you will not be able to read that on a voltmeter due to the voltage-current relationship". Funny how the WFCO 8712 on my old popup had no problem going to 14.4 volts, and it could be measured. Even my Harbor Freight battery charger went to 14.4 when I used that to top off the battery.
