WFCO WF-8955 amps in absorption mode
I have a WFCO-8955 (55 amp) that absolutely will not go into bulk mode even though it’s a 3 stage converter. Not sure if it’s inadequate wiring or an inadequate converter. It’s always 13.6-13.8 no mat...
Forum Discussion
13.5 is float not absorption.
WFCO's are well know for not going into boost mode.
NOW: This is relayed info but one forum member says he got into his and it's a singly part. Less than 5.00 (Way less) that burns out.. (A resistor) What I did not "Record" was the value or location of said resistor.
Generally a burned out resistor is obvious.
The value however.. Not so much.
WFCO's are well know for not going into boost mode.
NOW: This is relayed info but one forum member says he got into his and it's a singly part. Less than 5.00 (Way less) that burns out.. (A resistor) What I did not "Record" was the value or location of said resistor.
Generally a burned out resistor is obvious.
The value however.. Not so much.
