WFCO WF-8955 amps in absorption mode
I have a WFCO-8955 (55 amp) that absolutely will not go into bulk mode even though it’s a 3 stage converter. Not sure if it’s inadequate wiring or an inadequate converter. It’s always 13.6-13.8 no mat...
Forum Discussion
When my PD4645 goes into boost mode, I read 14.4 volts AT THE CONVERTER. At the same time, I read 13.(something) AT THE BATTERY. The battery voltage slowly rises to the 14.4v level. When it reaches 14.4v, the PD drops to 13.6v for bulk charging.
So, even if the converter/charger is putting out 14.4v, depending on where you read the voltage, you may or may not read 14.4v. (However, I agree that the WFCO is infamous for never going into boost mode.)
So, even if the converter/charger is putting out 14.4v, depending on where you read the voltage, you may or may not read 14.4v. (However, I agree that the WFCO is infamous for never going into boost mode.)
