ktmrfs wrote:
RJsfishin wrote:
Its as simple as this....and tilted to either side
nice install, but in Oregon, well for anywhere for that matter, I'd be concerned about the exposed screw heads. from experience they are NOT watertight, so it is highly likely that water will get underneath.
Personally I put dicor or similar on the screw heads and all the way around the bottom of the bracket.
Dicor under the bracket before you tighten them down is sufficent,it will squeeze under the bracket and around the screws and will be water tight,installed 100s that way and never seen one leak yet and you need very little Dicor.