What's the fridge flame supposed to look like ?
Here's mine: I don't think it should look like this. I haven't had it out yet but the visible top is clean and I just gave it a compressor blowout with no improvement.
Forum Discussion
Gjac: it's so random it's hard to know what really fixes it. I can but my finger over the home and adjust the flame but obviously not for long. I'll look at the pressure this weekend hopefully and see where it sits.
Randy: the burner chamber is press-fitted into the jet so I can't get anything in there. About all you can do with these is turn them upside down and blow them out. One thing I haven't done is pay attention to when it happens: right at power on when everything is cold, or after it warms up ?
Randy: the burner chamber is press-fitted into the jet so I can't get anything in there. About all you can do with these is turn them upside down and blow them out. One thing I haven't done is pay attention to when it happens: right at power on when everything is cold, or after it warms up ?
