What's the fridge flame supposed to look like ?
Here's mine: I don't think it should look like this. I haven't had it out yet but the visible top is clean and I just gave it a compressor blowout with no improvement.
Forum Discussion
I get it, but as I've mentioned before, this probe is completely loose: see pix. Also notice the notch in the probe. It was dead Jim.... Chris has seen more than me so I don't know if this is salt erosion, heat, or both.
I still hear an occasional backfire when buttoned up, so I think I'll call the vendor and work on exchanging it. The original factory burner did this and I couldn't fix it
What's curious it pic #3. Dunno what the residue is from
POSITION 1
AND VERY LIGHT PRESSURE DOES THIS
I still hear an occasional backfire when buttoned up, so I think I'll call the vendor and work on exchanging it. The original factory burner did this and I couldn't fix it
What's curious it pic #3. Dunno what the residue is from
POSITION 1
AND VERY LIGHT PRESSURE DOES THIS
