Wheel Assembly Advice
I finally got the time (and courage) to pop off one of the wheel hubs on my 5th wheel toy hauler. The trailer in question is a 2004 32ft Sandpiper Sport. The intention was to get all the bearing/se...
Forum Discussion
The spindle looks OK to me, as do the brake parts. Things are going to be worn and dirty after a few 10000 turns. I'd suggest to put it all back together but if you've already ordered the parts, then replacement is, of course, better. One of the best things you can do for brake hardware is to lube up all the moving parts. Spray grease or oil can will help with a possible stuck assembly part or adjustment down the road.
BTW, getting some penetrant on those backer plate bolts is going to save a lot of grief.
BTW, getting some penetrant on those backer plate bolts is going to save a lot of grief.
