1121 Lance Tip Out Sag, starting the job
Beginning extensive repair job on 02 Lance 1121. Water appears to have entered tip out gaskets as water marks are showing on deck below tip out tracks.
Forum Discussion
Moving forward to front passenger jack area.
Note angle iron is not connected to corner support metal.
Angle iron appears to be undersized and bent, I am thinking about adding additional metal in the form of box or rectangle. In Paper Clips job he used a large angle iron.
Note angle iron is not connected to corner support metal.
Angle iron appears to be undersized and bent, I am thinking about adding additional metal in the form of box or rectangle. In Paper Clips job he used a large angle iron.
